Pointe 3D Protector Break-off BR 1.5 TopHat View larger

Pointe 3D Protector Break-off BR 1.5 TopHat

Manufacturer: TopHAT Archery

Condition: New


Pointe Protector BR1.5 TopHat for shooting 3D archery, Nature, leisure suits to 1.5mm tube, suitable for Predator 2 Carbon Express Arrows 700 and 800, A groove to insert the tube for better protection and minimize breakage.

1,30 €

No reward points for this product.

More info

Data sheet




The TopHat®Protector is a one- piece precision- head that coats the first 1,5 mm of the carbon shaft. This protects the shaft of breaking and splaying.


3D - Shape:
That especially for 3D animals/targets designed shape is characterized through its high effectiveness. In comparison with other arrowheads this 3D shaped arrow point enters more aggressive and strait into the target. Through the shape of the arrowhead there is a high resistance of diversion. This leads to less tension and therefore more protection for the shaft. The shape prevents rebound on the surface of the target.

TopHat®Protector Technology:
The coating of the arrowhead protects the carbon texture at its weakest point completely.
It is still not recommended to shoot intentional against concrete walls but tests showed outstanding survival rates for carbon shafts.
The grooves for the glue at the shaft of the head are purposely low- shaped. This prevents the usage of too much glue. Wrong spread glue can cause imbalance.

Installation: After about 60 seconds the TopHat®Protector point sticks perfectly together with the carbon shaft (with TopHat®Bond). Beforehand the carbon shaft has to be whet from the inside and cleaned with a solvent. 1-2 drops of TopHat®Bond onto the shaft of the head and pushed in a rotating movement all the way until it is tight fastened.

Easy pulling: Similar to the wooden arrows the head diameter is broader than the carbon shaft. This feature causes the effect of an expansion at the point of entry. This makes the pulling noticeable easier.

Run- point accuracy of the arrow point: 0.006 µ


The head has one or more break-offs at is end. These break-offs can be broken off at leisure to get the ideal arrowhead weight.
Special insertions at the break off area make sure that the tolerance of the weight, after breaking- off a part, is absolutely slight.

To agglutinate the TopHat®Break-Off-Points we recommend TopHat®Bond.

materialStainless steel

No customer comments for the moment.

Write your review

Also purchased products
Related products
  • Ogive Point Brass Screw Big Archery
  • Field 3D tip to screw Arrow Wood 125grs SELECT
  • Easton Point CB One Piece Lightspeed 100grains
  • Pointes Tru-flite 8-32 Bullet 5/16 145 Grains 010B
  • Pointes Tru-flite 8-32 Bullet 5/16 110 Grains 720B
  • Pointes Tru-flite 8-32 Bullet 21/64 110 Grains 721B
  • Pointes Tru-flite 8-32 Bullet 21/64 125 Grains 723B
  • Pointes Tru-flite 8-32 Bullet 21/64 100 Grains 730B
  • Pliers for mounting traditional spikes BIG ARCHERY
  • Pointe Fut bois visser combo 3D
  • Pointes Easton Nibb X7 1514
  • Pointe Combo in 3D Screw Stainless Steel TOPHAT
  • arrowhead Nibb XX75 EASTON ARCHERY
  • Mini Balance de Peser MTM DS-750
  • Pointe ACC Parabolic EASTON ARCHERY
  • Arrowhead Legend Veneziana Medieval BIG ARCHERY
  • Arrowhead Legend Veneziana Medieval BIG ARCHERY
  • Pointe screw ACC Parabolic EASTON ARCHERY
  • Pointe field 3D Arrow Traditional Screw SELECT
  • Pointe Adapter Arrow Wood Traditional TopHat
  • Pointe Arrow Wood Feld Burni 3D TopHat
  • Pointe Middle Ages Medieval Traditional TopHat
  • Nibb X7 tip Eclipse 1714 EASTON ARCHERY
  • brass bullet tip Bu MS TopHat Archery
  • 3D Long Point Aluminium TopHat Archery
  • Arrow Wood tophat advanced 3D Brass
  • Pointe BACKBONE 600 -700 Break-Off 80-100 grains MAXIMAL
  • Pointe BACKBONE 350-400-500 Break-Off 80-100 grains MAXIMAL
  • 3D tip in 11/32 arrow brass Wood TOPHAT ARCHERY
  • tip DURA 3D Apex 85 grains Type 2 (6.68mm in diameter) TOPHAT ARCHERY