Arrow Pointe tophat Long BULLET
TopHat Bullet Long
To be used immediately after an arrow breaks directly behind the head. The TopHat®Long has to be mounted directly on the breakpoint. Through the extra length it is possible to continue shooting with the accustomed length of the arrow.
TopHat Bu Long
To be used immediately after an arrow breaks directly behind the head. The TopHat®Long has to be mounted directly on the breakpoint. Through the extra length it is possible to continue shooting with the accustomed length of the arrow.
Bullet - Shape:
This classic form is used very often in Fita target shooting. Through its round shape it is a little gentler to the target and easier to drag out.
Material: Aluminium
Aluminium is used in archery because of the low weight and its corrosion-resistance. It is possible to get a twice as long arrowhead with the same weight.
Available in:
5/16 - 70gn; 5/16 - 100gn; 11/32 - 80gn; 11/32 -100gn; 11/32 - 125gn; 23/64 - 125gn
TopHat®Long Technology:
The TopHat®Long is based on the TopHat®Classic technology. The TopHat®Long arrow points are almost twice as long as a common head, but they have the same weight.
Installation: The arrow point has to be twisted on the blunt shaft. Through the tread in the inside of the arrow point shaft and head are strongly anchored and a self-initiated loosening is not possible.
Centring: Though its conical area in the inner front of the head, it centres perfectly. This leads to a unique true-running accuracy. The flight-characteristics and the pinpoint accuracy are improved.
Easy pulling: The head diameter is broader than the wooden shaft. This feature causes the effect of an expansion at the point of entry. This makes the pulling noticeable easier.
Usually the TopHat®Long needs to be installed during the actual shooting, therefore we recommend the TopHat®Pliers* and the TopHat®Grip* for the installation.
You might also like